top and bottom End knock on rebuilt yb
Yesterday I finally finished rebuilding my cossie started it up and it ran prefect went with the first turn off the key but I have come back to it today n it had devolped a knocking from the top and bottom End. I have replaced all the big end shells the little end shells all the cam shells is had new pistons and rings the oil pressure is reading 2.4 bar cold then just over 1 bar when warm I haven't replaced the oil pump but it was working fine before I spotted the car and the old shells hardly had any wear on them. If anybody has any ideas is love to know to save me having to rip the engine out again and starting from scratch. Cheers