Scratch that, Photobucket is working again..



First thing I did was start taking the inside out, the sound deadening will be staying until next year when it warms up and I can be bothered to get the heat gun out



Only real plans are breathing mods for the time being, maybe cams next year but I'm concentrating on handling and stopping first, slightly more important!



Quite like it without the grill, looks a bit mean! I'm thinking about an oil cooler mounted in the bottom grill with the hoses running up and through the top grill, but shall see..



I couldn't be doing with the window switches swinging in the wind so bolted it to the door handle.
Also found that the JBL speakers I had in my first car fitted the door perfectly bar drilling 2 little holes and using some self tappers. Took apart the original speaker connection and used the spade connectors already on the cable, works! Result. Sound so much crisper than the standard Ford parts and are lighter too.



Same for the passenger side.



That's it so far, machining up an adapter for the MAF sensor to fit the Green cone filter I've got, the sensor on my old Fiesta must of been smaller as the flange on the filter is the same OD as the MAF!