Originally Posted by
1-PD
have some plastic headlamps that have become almost blurry, what product can be used to restore them back to clarity
done my xenons
started by wet sanding using 1500 then 2000 then 2500 then 3000.could see by this point that they were looking very good.so machined them using 3m fast cut then refined with menzerna. gtechniq c4 was used to seal them then 2 coats of coli 476.im pleased with how they turned out
before
after
its important to seal them afterwards as they will yellow as headlights come from factory with a uv coating