HI Guys,

I need help with working out how to wire up the VSS on my Saph.

Basically, the car has a 24v Cosworth V6 (BOA Type), using a hybrid MT75 'box, and is all bolted together and running.
However, the VSS and reverse lights aren't wired up. I have the gearbox sub loom (although haven't even looked at where it plugs into the 24v loom, so have no idea as yet if it will even work), but obviously the connectors on thgis sub loom are different to the connectors on the gearbox.

So, my questions are:

-Where does the gearbox sub loom plug in to the original 24v loom (up by the heater box I've been told??)

- which wires from the sub loom correspond with which wires on the MT75 VSS?

- which wires from the sub loom correspond with which wires on the MT75 reverse light switch?

Or, if there is an easier way please please tell me

Thanks