View Single Post
Old Aug 18, 2013 | 11:21 AM
  #6  
luxembourgrst's Avatar
luxembourgrst
Too many posts.. I need a life!!
 
Joined: Jan 2008
Posts: 566
Likes: 1
Default

Originally Posted by Karlos G
It could be detonation, but I've no had the boost drop before.
Set your timing to 8 degree's BTDC and see what happens.
What actuator do you have, it could be creeping open, perhaps try a little more preload.

Fuelling is a little rich but wouldn't cause this issue.
i have a -31 acutator the turbo is brand new ..

the turbo is starting to load at 2700 rpm...


when i set the timing i let the car on idle an then disconnect the vacumm hoose to the ecu i don t need to close this vacumm line because i gonna do a air leak no? and then set it to 8 degree ?
Reply