Thanks for the reply Rob.

Yeh it's Ryan's old loom, I was thinking last night that pin 5 was most likely ofam specific. Seems obvious really!

I have 12v and earth at te edis, I haven't checked the injectors with a meter yet.

Gap on the cps and trigger wheel is apprOx 0.8mm as it should be , how much tolerance is there on the 90 degrees btdc? Pretty sure it's reasonable close and I have adjustment in the bracket.

Is there any other way to test either edis or cps other than what I have already done? Getting pretty disheartened with it right now, may even juts rip the bloody loom
Out and start again!