View Single Post
Old Jul 27, 2013 | 09:13 PM
  #1  
leedsrhinos126's Avatar
leedsrhinos126
Too many posts.. I need a life!!
 
Joined: Jul 2010
Posts: 867
Likes: 3
From: Leeds
Default Mk6 Zvh rs Turbo




Hi i just got this car today, runs fine but quite alot if turbo lag i think.
Never had a turbo so pretty clueless
spec is as follows:
1.8 zetec block all work needed done by lancaster engines i.e oil gallerys blanked off breathers and oil return drill and tapped etc with new rings bearings gaskets seals oil pump carbon fibre water pump adapter plate 1300 cam tensioner
stage 3 fiesta rs turbo cylinder head with piper 285 cam adjustable vernier bit of a rattle from one tappet for about 20 seconds or so
felpro 2,5 mm head gasket using high tensile steel head bolt
lightened fly wheel with uprated clutch and diesel gearbox
fiesta rs turbo mangement with 195 superchip biege 701 injecters walbro 255 fuel pump
garret t3 recon turbo .31 acuator
bailey dump valve
82 degree themostat and 88 degree fan switch
air tech large front mounted intercooler
single box exhaust
rs 2000 shocks and springs new prior to the build
focus st 170 brakes 300mm front 286mm rear

What can be done to eliminate the lag? I haven't driven it properly yet maybe it's better when the engine warms? (just waiting for insurance certificate to buy tax)
Reply