Thread: Auxillaryshaftbearing problem
View Single Post
Old Jul 23, 2013 | 10:27 PM
  #3  
Turbo Zetec's Avatar
Turbo Zetec
Engine Machinist
iTrader: (1)
 
Joined: Jul 2004
Posts: 3,012
Likes: 32
From: Suffolk/Cambs
Default
you need to find where the high spots are (there will be shiny patches where the shaft is rubbing the bearing) and remove them with fine grit emery cloth (400 grit+ ideally) until it turns freely.
Reply
0