Thread: ST225 Sensor on O/S Wishbone
View Single Post
Old Jul 23, 2013 | 05:21 PM
  #2  
locum8's Avatar
locum8
Wahay!! I've lost my Virginity!!
 
Joined: Jul 2009
Posts: 65
Likes: 0
From: glasgow
Default
I'm think this is for the ESP if I'm not mistaken.

Just remove the bolt from the wishbone then give the balljoints a good spray of wd40 and work it up and down until it stops sqeeking then reattach.
Last edited by locum8; Jul 23, 2013 at 05:22 PM.
Reply
0