Good evening ,

just in the process of getting my cossie back on the road

its failed its mot on the abs light being on all the time 'indicating a fault with abs'
its been like this a while and drives fine.so far from threads on here i have checked the following.

-checked the cap that is ok and level is correct ( also bridged connector no difference)

-checked continuity of sensors all around 1100 give or take ,

-all relays appear to click when ignition turned (in fuse box and under the dash)

-fuses good and pump primes ,

-had sensors out and cleaned including pic up ring ,front two were cv greased up .

-rears were filthy, so were cleaned up when i fitted new pads & cleaned calipers up etc.

i want it mot'd so i can use it so can anyone help with the abs ecu plug pin out diagram so i can perform a few more checks with everything in situ to try and locate the fault ,

anything obvious I've missed , i know its been covered lots and apologise for asking AGAIN but could do with some more suggestions from those who know how annoying this problem is .

thanks in advance

Gary