After I changed wheel bearing I drove a lot, sideways too, but then I decided really took those last steps on this project, paint job, oh yeah!!



At first I made protection to parts of car that are not being painted.



Then it was time to fix a nasty dent on rear hatch.



There was a crack on front bumper, so I fixed with (what else can it be than...) fibre glass.



Also the front grille, needed some fibre glass on its back.



And this is the look of bumper right before plastic primer. See, no crack!



Then it was time for epoxy primer layer.

I got few problems with spray gun and acryl filler, the gun itself jammed Actually I just forgot to add acryl thinner in the mixture



So by this far boot and that enormous rear wing, had filler layer over them.



As well as bumpers too.



The fromt grille took lots of work, cause it did had a crappy paint by its earlier owner.

And finally, some pics of new paint, with a clear coat on it, your welcome guys:








Up next I just need to do a little weld on front bumper mounting, put car back together and enjoy the summer again (Well maybe there are few other thing that needs to be done but...)