Old Jul 8, 2013 | 03:13 PM
  #1  
IAN RS2k's Avatar
IAN RS2k
Regular Contributor
iTrader: (2)
 
Joined: Oct 2007
Posts: 238
Likes: 0
Default 2.3 TURBO ENGINE RS2k *** LOWER PRICES ***

ENGINE
I4 RS 2.3 Turbo engine custom built by HT racing built for 400bhp plus
Ported & polished 2.3 head
JE pistons made in America (custom)
Arrow con rods,
Crank balanced with steel dowels added to flywheel fixing face
Only run on bench dyno at HT racing never been used in a car Sell £2700 NOW****** £2000******


*Brand new genuine Ford bonnet never painted (cost new £570) sell £380 NOW £80

*Baileys alloy header & power steering tanks polished then chromed so always shiny forever as these are a pig to keep clean in polished alloy. Cost £240 +£80 to chrome =Sell £260 NOW £200


Name:  BAILEYSHEADERampSTEERINGTANK2_zps975d19b1.jpg
Views: 349
Size:  77.4 KB

Name:  BAILEYSHEADERampSTEERINGTANK3_zps8c02d939.jpg
Views: 342
Size:  40.9 KB

Name:  BAILEYSHEADERampSTEERINGTANK4_zps7c8e5f52.jpg
Views: 323
Size:  43.9 KB



Rear brakes Hi spec 328mm x 20 vented discs mounted on original drum disc centre
(one off) includes billet Hi-spec 2 pot callipers (WITH BRACKETS) (cost £508) sell £390 NOW £350

Name:  HI-SPECREAR328MMBRAKES_zps7ad0e615.jpg
Views: 329
Size:  79.3 KB


*Private reg plate on retention E I6V RS (EI6 VRS) (cost £599) Sell £599 inc assignment


Name:  PRIVATEPLATERS_zps5741fb71.jpg
Views: 313
Size:  60.6 KB




gate but for this but I am going to use it on another car. NOW £750


GEARBOX *****SOLD******
*Mitsubishi EVO 6 gearbox & front LSD diff transfer box done approx. 8,000 miles (cost £1550)bell housing modified to
fit Ford I4 RS2000 (same as cosworth) NO adaptor! Has been alloy welded & CNC
machined by Coltec engineering aka Holbay engineering custom flywheel made for
I4 RS2000 plus doweled at the back of the crank to flywheel for extra strength
Gearbox with transfer box & prop Cost £1550 + machining & flywheel £775
= (Cost £2325) Sell £1800 NOW £1600
Name:  EVOGEARBOXTRANSFERBOX_zpsdf94dd5f.jpg
Views: 907
Size:  115.9 KB

Name:  EVOTRANSFERBOXVSRS2K_zps42f21c89.jpg
Views: 571
Size:  101.5 KB



Name:  FLYWHEELFORDTOEVO_zps4149973b.jpg
Views: 312
Size:  60.1 KB

Name:  FLYWHEELFORDTOEVO_zps828b7954.jpg
Views: 376
Size:  56.3 KB


*Custom made FRONT DRIVE SHAFTS EVO inner to Ford outer. Plus Evo prop shaft cost £344
Sell £280 NOW £150


*EVO –RS rear LSD diff rare with drive shafts normal EVOs have a yaw control
(pump controlled) RS diffs are stronger & are sort after. Sell £1300



* AP RACING EVO organic CLUTCH brand new.Cost New £700 this will fit the custom flywheel to EVO box £500 NOW £400



*Vibratec GEARBOX MOUNTS x2 the front RS2000 gearbox mount. One I used for the front evo gearbox mount the other one for a front engine mount on a custom mounting plate (never used). (cost £195 each) Sell £150 each NOW £250 THE PAIR
Name:  mount_zpsaf45db8f.jpg
Views: 291
Size:  5.1 KB


I also have lots of other bits & pieces too much to list from a RS 2000 eg standard bumpers, dash board if the shell does not sell etc etc

based in East Kent

Last edited by IAN RS2k; Jul 4, 2015 at 07:59 PM.
Reply