update time again the coil pack & ignition amp brackets are fitted



air injector bracket spacers made


i had to strip the turbo & move the hanger bracket around as it was in the wrong place as the turbo is in a new orientation now ,so i need to make a new turn buckle with new rose joints as the old one is to short .


stainless reducing misalignment spacers all fitted



started plumbing up the tilton pedal box



also plumbing the rear end up



also had to cut the actuator bracket in half turn it upside down & inside out so it lined up correctly ,i just need to get it welded now



more updates to follow tonite .