View Single Post
Old Jun 27, 2013 | 09:38 PM
  #17  
Stu @ M Developments's Avatar
Stu @ M Developments
PassionFords Creator
iTrader: (12)
 
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
Default

Originally Posted by luxembourgrst
well ok is my ecu 18psi (1.24 bar )limited

i push the turbo pressure down at 1.5 -1.6 bar the car goes better but still cutting at 4500 rpm

then push again the power down like 1.3- 1.4 bar it s runn perfekt but only somtimes cutting in the 3 gear full trottle
after some pushing my AFR still red and still on 22.33 for 3 seconde at then very lean and than continue normal driven again fine is this normal ? not enough fuel

my afr at idle is between 14-15

well i need a no limit ecu chip
Get your car to a tuner as soon as possible mate as it requires mechanical tuning, not just a chip.
You are very lucky its so lean as if it was richer you would have holes in your pistons by now!!

Last edited by Stu @ M Developments; Jun 28, 2013 at 08:19 AM.
Reply