Originally Posted by jamie's

380bhp, could push 400bhp if you ring the neck of the turbo
as said go bigger turbo for reliability
also why valve cut out with standard cams?
and is your 8-1 comp ratio before the pistons where machined for valve cut outs?
if so then your no longer on 8-1,
torque wont do 400 with the spec
best mod is bigger turbo, better inlet cam and decent live map
that should give you your 400bhp and near on your 400lb/ft
but as said, dont chase numbers, that set up will give a very fast road car(unless your ROD)