sorry been away from the forum

quick update

car had a bent con rod that was causing the black smoke so new engine fitted

now it wont start have checked the timing today and that was fine

all parts from my engine were transfered on to the new engine prior to fitting

so i know my parts were good and that my engine still ran

error codes on my fordmidable comes up with P2288
injector control pressure too high

so now lost as to what it can be FRP starts at 8 and will rise to anything above 500+ and back down on cranking

i am going to try the imv and see if that makes a difference

is there anything else i can try stumped with this car