Hello,

As some of you will know I've been rebuilding my Sapphire 4wd Cosworth, it's now about 80% complete.

I have just started to tidy up the wiring on the loom and would really like to get new one. There nothing wrong with the one that's fitted now and appears to be in good condition, however, it is as old as the car and as I've replaced everything for new I might as well do this.

I've been having a good look around on different pages on here and around the net and making the loom itself seems a straight forward job.

I bought the fuel pump, coil requiring loom already but I'd like to hard wire it in.

Can people put any hints or tips on here that could help me or anyone else along the way?

I've got the diagrams off biggturbo etc to start with.

Ideally I would like original coil wiring to use until I go wasted spark so I'm going to hard wire the twin amp loom in and fuel pump relays.

What do I do with the 2 diagnostic plugs nearest the 35 pin ecu? Do I repin them or loose them?

It also looks like I can loose a good length of cabling by cutting out the 3x8 way plugs off the bulkhead and hard wiring them in.

Thanks

It'll be a slow thread but ill update my progress as and when