Toyota Supra 3.9 diff stripped ready for shot blasting and powder coating. Then uprated LSD kit from Weir Performance . The diff was tested for torque load before stripping and it was only 30 ft-lb which is a bit low . After the Weir kit it should take it up to a 100 torque load which should be more than enough for road and track use .
Need to cut 2 bits off the diff to give it more clearance for the exhaust .
(Marked with a blue line in the above pic )
Started to tape up the bits to protect from the shot blast and powder coat .
Also tapped up the original LSD sticker