Group a spec r dump valve in black with the stainless braided hose this is 250 pounds to buy new! one allen key bolt missing from top also has push on hose fitting at the top as i needed the screw one for my car.
So to use the braided hose in the pic you will need to order a m10-1mm to an3 fitting from torques
£150 posted



Stainless t piece for dump valve 60mm
£20 posted





Spec r turbo pre rad this was on my car bolted to the top of my rad has a 8mm in and out also a bleed screw on the side! I dont think its made for a cosworth but worked fine on my car for many years only took off as my new intercooler came with a new pre rad
£50 posted




Turbo water pipe fittings in stainless bango bolt type 10mm tails
£10 posted









RS500 style intercooler no idea what make its a 60mm core one with a 60mm inlet and outlet! The out
let pipe was modded so it would mate with my hart manifold a little better so may need modding again to use on a car with the normal type manifolds! Also has a small tapped hole in the outlet that a water injetion jet screwed into that will need plugging or welding up also one on the other side thats already plugged
£60 pounds will have to check on posting so pick up from basingstoke would be better