Originally Posted by
wrigle
hmm any ideas what i could be then because it only happens when the air temp on the dash goes. this only used to happen if you hit a puddle usually, then obviously the sensor would be full of water and stop work so the car goes into limp mode but now the i never get the air temp on the dash and car is permantly in limp mode. is the air temp sensor not linked to the ecu ?
Yes, the air temp sensor is linked to the ECU, the connections to it may be corroded, loose or come off, if you clean up the contacts/ reconnect it it may be ok
You will need a pre- OBD11 code reader to work on your TDDI (F-super/ Bluefin) an OBD11 one won't work