Fascinating concoction. Its a L8 motherboard installed in a L6 ecu case with the Co Screw AND its potentiometer removed and unsoldered from the motherboard.

The chip in there looks like its been in and out at least 10 times too as the bloody ink has been rubbed off the label!

On the upside, the chips specs are as follows:


Basic Calibration Specification for 5099:

• Originally Sold: Aug 2008
• ECU Type: L8 ECU
• Babyboard Required: Yes
• Encryption Key required: Yes - Green
• Pectel or Weber: Weber.
• Engine Type: Ford YB 2.0
• Engine Compression: Standard
• Head Spec: Standard
• Camshaft Spec: Standard:
• Injectors: Bosch 803s
• Turbocharger: T3.48
• Map Sensor: 3 bar
• Intercooler: RS500 type

Additional Features Installed:

• Closed Loop active: Yes
• Air Injectors active: No.
• Serial Data active: Yes.
• Anti Lag active: No
• Launch Control active: No
• Flat Shift active: No