Originally Posted by
RichieST
Seem to remember the bung and seal was around £5-10 from Ford. No you don't need to remove the housing, you might loose a litre of coolant, but catch it in a clean tray if you can then pour it back in. Its easy enough to do, you just can't really see what you are doing as it is underneath.
This is the part, on the RS the hole in the housing is used for a water feed to the turbo, but the ST170 doesn't need it so it has a bung fitted.
That's the bugger!! I will give Ford a ring today. I have been looking on google and eBay but don't seem to find anything like your picture.
How do you remove the bung? Do you just pull it out with a pair of pliers?
Thanks