Thread: Yet another budget-built, Sierra Mk1 3dr ´84, "last steps" *FINISHED!*
View Single Post
Old Jan 27, 2013 | 06:04 PM
  #6  
RalliArttu's Avatar
RalliArttu
RalliArttu
 
Joined: Jan 2013
Posts: 74
Likes: 5
From: Upper-Savo
Default
Thanks from your feedback guys

In august I did already some welding job.
There are few pics of holes...









…and then some pics after MIG-therapy









The joints were made by “butt-weld”- style so those places wont rust immediately again. And yes welds were made with Esab, Kemppi is just too much for my wallet...

Last weeks I also changed a new heater matrix, and I adjusted/checked valve clearences. Tomorrow a new stiffer front anti-rollbar (from V6 models) will find its place underneath Sierras suspension.


If I remember, I´ll add some pics of anti-rollbar installation.
Last edited by RalliArttu; Jan 27, 2013 at 06:08 PM.
Reply
0