Thread: Focus MK1 pats/new key/programming questions
View Single Post
Old Jan 27, 2013 | 04:25 PM
  #6  
RichieST's Avatar
RichieST
15K+ Super Poster!!
iTrader: (2)
 
Joined: Aug 2004
Posts: 18,732
Likes: 449
From: Wiltshire
Default
This procedure may also work for programming new keys to the immobiliser.
PATS System II:

This system hasn't got a red key, instead it needs already programmed keys to access programming mode.
  • Insert the first already programmed key into the ignition and turn to position II
  • Turn back to 0 and remove the key
  • Insert the second already programmed key into the ignition and turn to position II
  • Turn back to 0 and remove the key
  • Key programming mode is now activated and you have ten seconds to:
  • Insert the unprogrammed new key into the ignition and turn to position II
  • Turn back to 0 and remove the key
  • Allow 10 seconds to pass for the system to exit programming mode.
Reply
0