Originally Posted by
pete241
You have to take ti all apart get seals out.
Haveing the same problem here as replaced camseal half moons ect and still leaking.
Goto-do as advise by HT raceing is to ell seal the front cam bearing suports underneath!
As oil will crap out under.
let me know and when done let you know if this works.
pete 241 coz Mk1 race project...
You can remove them by removing the cam pulleys (at least on 2WD you can) remember to use VITON seals, otherwise you are just going to have the same problem.
But as said the half moon seals (You will need to remove the cam cover for these) also cause problems and aftermarket ones aren't always the correct dimensions which causes the issue.
Worn 'spacers' can also cause leaks.
Martin