View Single Post
Old Jan 2, 2013 | 07:58 PM
  #21  
RiggerWrigley's Avatar
RiggerWrigley
Virgin
 
Joined: Jan 2013
Posts: 7
Likes: 0
From: Lancashire
Default

Originally Posted by RichieST
What happens on these is the dual mass flywheel starts to wear and metal shavings clog the starter motor up until it wont turn any more. I bet this is happening. I'd suggest whipping the starter out and seeing if it is clogged up with crap.

This sounds like the problem, when I try to fire the engine nothing at all happens, the starter motor doesnt even click. With jump leads it made no difference. It started at tea time but I tried it again at 2000 and the problem was back. This time I bump started it on a hill in 3rd gear and it started up. I then drove up and down the street for 5 minutes and it runs fine. I turn it off and it will start again no problem until I let it cool down then it returns to the original problem.... I'm gonna have to take it to the garage tomorrow as I wouldnt even know where to start looking for the starter motor, never mind have the ability to whipp it out! I wish I would have done some sort of mechanical work back in my colledge days.
Reply