Originally Posted by
zippyobrien
I would look at rainSing the shell on the subframe. Ie put spacers under the front subframe and rear beam mounts then cut the shock turrets out and weld them in lower.
Also space down the engine. This will keep centre of gravity low and the drive shafts at the correct angles
Id be gob smacked if thats how it was done, you'd be lifting the car shell up but gaining no clearance at all, what would be the point?
Id guess it has longer struts/springs and possibly cobled together longer bottom arms, its ford dont forget.
The racing puma was cobled together crap also, extended bottom arms to create stance, they wernt developed, they were chucked together and for the car above that didn't get produced did it?