Old Nov 18, 2012 | 06:31 PM
  #7  
Gadget's Avatar
Gadget
Spanner monkey
 
Joined: May 2003
Posts: 3,556
Likes: 14
From: Peterborough
Default

The blue wire goes to a male spade near the throttle body connectors,
the grey wire goes to the third relay base
the brown wire goes to the third relay base
the reddy pink wire goes to two of the relay bases and pin 2 on the coil pack plug
the green and the yellow go to the same relay base
the brown / green is a short length to a male spade
the orange goes to one of the relays ( i would say fuel pump feed )
Reply