Originally Posted by
dug112y
if you read back a few posts mate there a guy in cambrdgeshire thats said he could prob do it for you!!
spoke to cambridge rebore this morning, will need a jig hence ive been messing about making something today.
Originally Posted by
stevieturbo
I would think the actual manifold flange would need welded to a solid structure for it to be machined. Using the tubes for support they will flex when the cutting head is passing over it
You'll just have to weld it up then cut them off again.
Although if it can be surface ground that might be easier ?
Originally Posted by
stu21t
I'm sure the guy who did mine can do it for you but as said before, he's not that quick.
Originally Posted by
zippyobrien
I can do it at work. Done one for luke89 on here. The only car I've seen running a gt35 ext waste gate on a 4x4 fanny mould
a friend of a contractor i know has said a few minutes ago he can do it, hes coming in the morning to take a look, but he reckons hes got adjustable blocks it can be mounted to and he will mill it, so il see what he sais in the morning, if thats a no go then il take it to cambridge rebore monday and see what they say.