update on the overhaul of the front end. i couldnt get any new seals from ford so iveused PTFE and some sealant to seal where it was leaking and seems like its been doing its job and its not critical to the function of the master cylinder but if it goes again i will buy a new one, ive also ground and sanded all the rust off the servo and cylinder, put rust killer on the areas effected then primed with etch primer and painted with gloss back followed by a couple of clear coats. ive also done the same with the rest of the braking mechanism. here are the pics.
before

after





ive been sorting out the common rust problem. pics of me sorting out the rust.


ive also removed the heat shield to get to see any possible rust that needs sorting.

also cleaned the inside of the car (it needed doing) looks alot cleaner now. ive also removed the steering column and the wiring loom until i need it again.



the bits removed

now on with the rust killing!!!




















rust killer added





after a coat of primer

after 2 coats




after 2 coats for black and 3 coats of clear








the other side


i will be starting the otherside tomorow.