Thread
:
1.7 project, slow but steady [picture heavy!]
View Single Post
Oct 6, 2012 | 09:25 PM
#
5
Kizza
Wahay!! I've lost my Virginity!!
Joined:
Oct 2012
Posts:
52
Likes:
0
From:
manchester
for starters here are some more things i managed to get my hands on
got these seats for £35 and the belts for £25 posted not the best in the world but 2 seats and belts for £60 not bad i dont think the worst thing is the belts are pink lol
got these for £50
also imanaged to get thses little beautys for £70 posted
also for £7.50 each i manages to get these
after getting loads of stuff at bargain prices i decided to start to fit it all.
pics of the bushes getting changed
sadly i had to change the wheel bearing :-( again!
but il be doin that later on
firstly i tryed pulling out the front wishbone bush but i didnt have a big enough socket to i had to take a different aproach
i found my trust drill did the job properly
then i fitted the bushes and fitted them back onto the car.
oiled up
fitted
it took about an hour to the the first side and about 15 mins to do the other side, well thay do say practice makes perfect
got these through the post then got them cut, crushed and reheated by a mate of mines brother who works on truck springs for a living
after the reworking they were estamated to be about a 60-80mm drop on the standard car.
i was waiting for other things to eather come up cheap here and there or to come through the post so i started fitting all the other things i had pics
then i put the brace on
after looking at the state of all my shocks i decided to get some more uprated ones
while i was cutting out the drivers door my grinder went pop and started to smoke, not the best start to a saturday morning so after i went to B&Q to take it back and get a new one i got a free upgrade because the price had been cut across the range so took it back home and started again then soon after i touched the glass and bang....no more glass so i decided to pack up and leave it for the day before something else went wrong. pics
the day after i fitted perpsex pics
i then started to clean up the back of the car, it was looking a mess
i got the bearing changed at work ready to go back onto the car.
i will upload another progress report later ive got to take the misses to the docs back soon
Reply
0
0
Kizza
View Public Profile
Find More Posts by Kizza
View iTrader Profile