Thought i'd better update.
Been doing quite a lot on it lately but nothing really worthy of pics ( and i keep forgetting lol )

Been sorting through the loom, removing unused wires, all the front end is done, just need to do the rear now, things like rear wiper and boot light. I will be removing them right up to the fuse box.

I know it's only a track car but i still want the engine bay to be as free from clutter as possible so will be hiding the engine bay loom which means extending some cables and splitting from the loom.

Like the brake resevoir loom ( probably changing to a mondeo servo and cylinder )



Also thought i'd tidy up the fuel pump loom



Bonnet pins and recesses have been cut in and fitted, Unsure whether to change the rivets to black ones?





The Twins came over the other week for a BBQ so thought it only right they work on te car while the food is cooking lol.

Dave sorted out my passenger wing which was dented at the bottom - i forgot to take pics but it looks just right now, just needs blowing in!

And Stu started with the heat gun on the floor deadeners. Got the four floor pan deadeners off, just leaving me to finish the last bits with thinners,

Also got the 2 off of the rear seat base and the boot floor pair.







Removed the metal sections between the floor and the seat hump





Also had a bit of crud by the o/s front bumper mount so chopped it out



Got a replacement section of ebay for £4 lol, and chopped out the bit i needed



clamped in



and welded in place



Just need a bit of filler and seam sealer to finish it off.

Still collecting bits too

Got myself a Pectel T2 Ecu and Ahmed braided loom
Zetec S rear beam
Focus St rear discs, calipers and hubs
Front calipers are off for shot blasting then i'll rebuild them
Toyo R888's are in my garage
Tubular exhaust manifold
Front mount cooler

So chipping away still and slowly getting there.

Hoping to get the inside painted soon just to freshen it up a bit then i should be able to fit all the inside back up!