View Single Post
Old Sep 16, 2012 | 11:00 PM
  #2  
RWD_cossie_wil's Avatar
RWD_cossie_wil
10K+ Poster!!
iTrader: (9)
 
Joined: May 2004
Posts: 11,919
Likes: 11
From: birmingham west mids
Default

Gutted

I would take the car to a tracking centre & get the geometry measured.

Take it the back end hit the kerb first?

I would suspect the rear trailing arm & possibly the beam if the mounts have been bent.
Front track control arm and shock absorber, they bend where the strut goes into the hub.
Check the front ARB & pickup points.

Steering rack may have bent the steering arm, or pushed across.

Maybe a couple of wheels as well

Hopefully won't be too bad, have a good look underneath to see if anything is visually bent, then get it on the tracking machine to see what's out of line.

I'm assuming it's 2wd?
Reply