View Single Post
Old Aug 28, 2012 | 07:09 PM
  #18  
tomoyb's Avatar
tomoyb
I've found that life I needed.. It's HERE!!
iTrader: (3)
 
Joined: Oct 2009
Posts: 1,024
Likes: 0
From: scotland
Default

never mixed any plugs up i just took the phase sensor one off and put back on again

map sensor is fine,car ran perfect before removing coil and going wastedspark

ive unplugged one ign amp and it fired up on 2 cylinders as it should,turned car off and unplugged that one and put other back in,cranked it and wouldnt start on two

so i then tried the plug that fired 2 on the amp that never and it fired on 2

tried this again with other plug on both amps and wouldnt start,so id of thought one plug isnt getting what it needs to fire

but i cranked over with plugs out and they all fire

opened ecu and checked connections for the 8th time,everything is ok in there

it sounds like all 4 cylinders are firing at the same time instead of 2?
Reply