Originally Posted by
saph_Al
Thats a good idea Tony i would be far happier with a plug and play option so to speak . I wan't mad keen on the idea of rebuilding a loom to suit and changing the sensor's ect . To be totally truthfull i wasn't aware you could map the weber units . Any more info on getting a hold of one ? cheers Al
Then make it plug and play. Just make your own patch harness.
There may be some additional wires but most should be covered with the patch harness. Ive done it before wiht other ecu's
One thing that would be good to get rid of though is the crappy 4 tooth crank trigger.