Originally Posted by
xr2wishy
There are a few to choose from for that power band, I have been looking to break 400bhp on my tuned Zetec turbo setup, I've decided to go with the gt3071r on a 0.63 housing.
I had a t04b and although it did well, it didn't last long. But it was relatively cheap.
Wilky can do a t38 for a very good price, that will get good power, although laggier.
Cheers mate.
Thats intersting to know about the T04b...
Any idea how much the t38s are? I don't mind a little bit more lag, might be a goer that one if they are cheap enough..!!
Current spec of the engine is
Zetec 2 litre silver top
heavy duty valve springs and mild port/polish
Forged pistons and Conrods
the current oil pump thats on the 60k engine, the oem ford one
ARP bolts on the mains and conrods
stock headgasket
Compression ratio of around 8.5:1
New big end bearings and mains
fleabay exhaust manifold
Fiesta RS HO inlet manifold
55lb or 80lb injectors depending
Turbo - to suit
Pectel T2
I know the HO inlet mani might not be up to the job, if so I will need to get something else