Old Jul 26, 2012 | 05:58 PM
  #26  
McGoo 69's Avatar
McGoo 69
Advanced PassionFord User
 
Joined: Jan 2007
Posts: 2,460
Likes: 2
From: Los Santos haha!
Default

Originally Posted by RWD_cossie_wil
No 1/4" off one side, you will see when you line it up with the beam, you also need to run the 108mm shafts instead of the 100mm 4x4 items.

Ps my above post was a joke, don't get all upset, hence the use of
ok cheers.

so were saying that im best of modifying the diff case rather than use a 7 1/2inch rear beam as we dont realy know what affect it will have on the geometry or drive-abilty of the car.

im not gettin upset, i know ive done things the arse around tits way but by doing what ive done ive learnt alot.

the first 2 cars i had when i was 17-18 were two mk3.5 fiesta si's

i bought my fast ford featured rep just after i had my 2nd green si, so i didnt know much about cars at the time nor did i have alot of money.

i started to work on the replica, then i sold my si and bought a escort cab which i ran for a while untill it started to die so i then did the 2k scrappage scheme on it and got a 1.5turbo mitsubishi colt ralliart

then i got a e46 bmw 323 m3 replica then i then got a e30 318is..

buy following the route i have ive naturally progressed with my driving and knowledge on how a car works etc..

ive learnt that its a waste of time making big power on fwd when rwd puts it down better

you have to remember i started this journey when i was 18.. i had no money or any real car experiance.. to do what ive done in between im proud of myself, ive done many engine conversions on my drive and they have all been a success

yes the yb engine is the original engine for a cosworth but buy taking a zetec and making it work i will acheve a great deal more personaly than i ever would have done if i just went out and bought a cosworth and changed the wheels

ive selected many one off parts on my build many of which alot may have never seen in a cosworth so even if it doesnt have a yb in it, it will still be an amazing car

i dont take anything on the internet seriously but at the same time i carnt be arse with the same comments over and over.

if the parts are infront of me i can build the car and put it together and make it good but i just need help to make sure i select the correct components the first time round.
Reply