Originally Posted by
martysmartie
Then that does not apply then, I suspect you do but you have changed your TPS, along with inverting the outer two wires on the TPS, haven't you?
It may be worth checking your TPS output though, as this will give you some idea as to it's working.
Martin
I use 4x4 loom and TPS PF09. I checked it at ECU pins - it is the same situation. If it is adjusted to 200mV, ignitition ON and I see that it still 200-300mV(not more then 350mV) then engine start up OK. if more then 350mV(for example 500mV) the revs is 2000rpm. Unplug and plug ISCV and it voltage droped to 200mV and revs droped to 900-1000rpm. Today I have made a video when I unplug ISCV and TPS parameter droped from 5degrees to 1 degrees if you dont believe me ))
http://www.youtube.com/watch?v=ALQb-...ature=youtu.be
Last edited by Yura; Jul 17, 2012 at 08:28 PM.