well today i set about putting my spot lamps on, after a little bit of thinking i decided to mount them on the top of the bumper.
first thing to do was to mark where abouts i wanted the lights on the bumper.
The i removed the bumper and cut out part of it so the light brackets could be mounted.
once i had removed what was needed i cut a 4mm piece of ally to fit into the space i just cut so the mounting point for the light bracket was stronger.
i then mounted the light like so
then mounted the bumper back on
next step was to give the lamps some support at the back so iv used a juberlie clip on each lamp for support and level adjustment.