with regards to tests 10 you either got open circuit ie infinite resistance or you got continuity I will assume that by you saying nothing this is infact infinite resistance
ie open circuit
You now need to check the wires from pin 3 and 4 5 and 23 are not broken by means of buzzing them out with your test meter on ohms
you also need to check that these are actually the right wires you have plugged in to the phase and crank
If your car was 4x4 why did you change the ecu and loom when fitting a 2wd engine
all you needed to do was fit the 4x4 pfo9 tps to your 2wd
better still would have been to fit the 4x4 plenum complete to the 2wd engine