Thread: Converted to EFi having a few troubles
View Single Post
Old May 10, 2012 | 08:38 PM
  #19  
mentalasanything's Avatar
mentalasanything
I've found that life I needed.. It's HERE!!
 
Joined: Sep 2005
Posts: 1,329
Likes: 7
From: South East
Default
Originally Posted by Cameron
Cheers i have wired pin 6 to the oil pressure switch on the block, is this correct? I dont have battery light either.
Hmm that don't sound right. There is a connector on the FRST loom that connects to the oil pressure switch. That diagram should show pin 6 connecting to the oil pressure light on the dash.

Battery light wire runs straight from the alternator, light blue wire.

Lee
Reply
0