Here's the switch










And the thread






THIS IS A DEALER FIT OPTION PLEASE DO NOT CONNECT ANY SWITCHES YOUR SELF ONLY FIND THE WIREING

GUIDE: HOW TO FIT FACTORY AIR BAG DEACTIVATION
[

b]PRICE TO FIT:[/b] £38 Parts, £20 Ford for Programming

PART FINNIS NO REQUIRED:

1381035 key switch
1035250 sticker Decal
1353959 Blank Switch Light


DO NOT CONNECT ANY SWITCHES JUST PULL THE WIRE OUT THOUGH THE HOLES ELSE THE AIRBAGS WILL GO OFF!!!

step 1:
remove the glove box





Step 2:
Find the wire taped up at the back



Step 3
Remove the Knock out Pannel next to the MP3 Socket

Step 4
then Pull the wire though

Step 5
Refit the glove Box leaving the wire out (i taped mine out wire masking tape so it would not go back in)

Step 6
Find 2 Small Flat Headed Screw Drivers and cover them with masking tape so they will not scratch any pannels

Step 7
insert then screw drivers into the pannel gaps near the blank (as shown in red) and then push the screw drivers outwards to pop the blank out.(the pic shows the light blank fitted)



Step 8:
On the back of the blank theres a wire pluged into it. this is just to store the wire so you can remove it from the black and again masking tape it down so its ready to have the new blank (as shown in the pic above) fitted.

Step 9:
Open the Passanger Door And remove the Sticker that shows and states NO CHILD SEAT IN FRONT and replace with new Decal.

Step 10:
Take all parts to ford and ask them to program with the WDS laptop (it should be £20 as its a small 10 min program) And Fit the Switches


ONCE AGAIN DO NOT CONNECT ANY SWITCHES GET FORD TO PROGRAM AND FIT THEM TO YOUR CAR!