OK guys, I am losing it with this one.

Car doesnot want ot start anymore now.

Changed the phase sensor by the dizzy ( does it matter what way the red and blue cable is ? )
I put the nr 1 plug ont eh block and it sparks
Sparkplugs are wet ( when I look into the hole from the sparkplug I can see the gasoline standing in the piston so I got them both already what is good news
When I disconnect the injectors the car starts but shutdowns directly ( there I donnot have gasoline I know

So I got spark and gasoline , I turned the gasoline pressure down to 2,5 bar assume it had to much but it still is not starting.

Plugs I tried IK27 gapped 0.65 mm and ford 902 gapped 0.9 mm

The warning light from the engine keeps burning also once a while but not flashing so I cannot read the code :-(

What can cause this ? I donnot want to start to much anymroe there my oil is gone be fludded with gasoline.

Steven