Adjustable Rear Beams are Awesome!!
Finally had all the little wiring issued sort so I picked the 3 Door up from DynoTorque saturday morning i'd already had it corner weighted and the geometry setup at Jacksons the previous saturday but other than the drive to DynoTorque to drop it off for the wiring I hadn't driven it and certainly not in anger.
All Saturday and Sunday i've given it a good shakedown and I have to say it's awesome, everything feels so tight and postive it doesn't go sideways unless you really provoke it and I mean really! So much grip the way it turns in the grip is amazing!
Here's a quick spec of the the suspension mods:
Complete resto underneath stripped, welded, undersealed, painted.
Every single nut & bolt replaced underneath with 12.9 zinc plated ones
All suspension components stripped and powder coated gloss black
Adrenaline Stage 2 Rear Beam
Solid Rear Beam Mounts
MSD Poly Diff Mount
Escos Rear 22mm ARB with new Powerflex Bushes
CDF poly bushed drop links
New Rear hubs with new bearings
Recond driveshafts
Special recond 7.5" Diff with 3.9 CWP
Gaz Gold Coilovers
Front Powerflex topmounts (although I do want some adjustables at some point)
Recond front hubs with new bearings
Recond steering rack with new tie rods and tie rod ends plus solid bush mounts
New steering column bush
New Powerflex Front ARB bushes
Compbrake Front adjustable TCA's with new Powerflex bushes (the stronger thicker TCA's you can get)
Front grp a strut brace
Custom triangulated rear strut brace with extra plate in floor strengthed though to the diff mount
Rich
Last edited by Sonic Boom; 27-03-2012 at 01:15 PM.