The Aquaero system controller is now programmed as follows:

If the 1260 radiator inlet temp reaches 27 degrees fire up the 200mm fans at 20% speed.
This then ramps up at 20% every 1 degree until 30degrees at which point they run full speed.

If the water outlet into the reservoir sees 30 degrees water temps, we can assume the 1260 alone isnt dropping temps enough so the 3x scythe AP15s on the 360mm rad fire up at 20% but this time go to 50% at 31 degrees, 75% at 32 and full speed at 33 degrees.

The case fans both follow a similar curve, aiming to keep the case ambients below 28C.



All in all I am VERY happy, and for anyone interested in fan noise, the 200mm's really are silent unless you are within 12" of them.
The AP15s arent though. LOL