Well i managed to get a 2.9 xr4x4 shell with all the running gear so i used the whole drivetrain and axles out of this. This left me with a 7'' lsd and rear anti roll bar. If ur car is a ghia it should already have the heavier front arb. I would advise trying to get a full car like this as it will give you these parts and also the brakes are a bit bigger 2. This will give you pretty much all the conversion parts apart from the wiring etc. If you get a 4x4 box and a dohc mt75 box just use your rwd front susp and put the bellhousing and input shaft from the 4x4 into the mt75 and this will do rwd. The 24v is strong its just with the turbo compression has to be lowered so im not gona push boost 2 far til i get the bottom end rebuilt. I would def recommend tryin to get a mt75 gearbox 2 as its much stronger.
Last edited by 4x4sapphire24v; 13-03-2012 at 12:02 AM.