Engine:


Started test fitting the turbo kit:


Here is the parts List for what came with the kit, some things will change:

This kit made 396Whp/372Wtq @ 24psi on 93 octane

TopSpeed Turbo RACE Manifold
Garrett GT2871R Turbo (4" anti-surge compressor housing & T25 Plus v-band outlet turbine housing .63 A/R)
-4AN Braided Stainless Turbo Oil Feed Line (includes all necessary AN fittings and line from block to turbo)
-10AN Braided Stainless Turbo Drain Line (includes all necessary AN fitings and line from turbo to oil pan)
-6AN Braided Stainless Turbo Coolant Lines (both inlet and outlet with necessary turbo fittings/lines from turbo to coolant lines)
Zetec Oil Pan (with -10AN fitting and stat-o-seal washers already installed for turbo oil drain connection - leak free)
TopSpeed 2.5" Stainless Downpipe (v-band - turbine housing to flex pipe)
TopSpeed Stainless Dump Tube (v-band, works with included Tial 38mm MVS Wastegate)
Tial 38mm MVS Wastegate (blue)
Tial 38mm MVS Wastegate Spring Set (all 6 springs, from 4.35psi - 24.66psi)
Greddy Type RZ BOV (grey)
2.5" BOV Tube (Greddy style 2-bolt flanged tube)
TurboXS Manual Boost Controller
Garrett High Density Intercooler Core w/ATP Cast End Tanks
Siemens Deka 60lb/hr Fuel Injectors (4)
Diablo MAFia
All 2.5" HOT side aluminum tubing, silicon couplers, hump hoses, stainless t-bolt clamps (turbo to intercooler)
All 3" COLD side aluminum tubing, silicon couplers, hump hoses, stainless t-bolt clamps (intercooler to TB)
4" Hi-Flow Cone Air Filter (includes 45 degree silicone coupler, tubing and clamps)