Old Mar 10, 2012 | 08:41 PM
  #35  
steven mc kay's Avatar
steven mc kay
I've found that life I needed.. It's HERE!!
 
Joined: May 2007
Posts: 1,092
Likes: 3
From: ballymoney co"antrim northern ireland
Default

Little bit of a update .

domanic and the mc neill team have started a little work on the car .

rear quarters are temp fitted with small screws to every thing gets lined up, then they will be bonded on .
This image has been resized. Click here to view the full image. The original image is sized 1024x768.
gear box, front diff, engine and front x member are sitting in place so over the weekend domanic hopes to sort the engine mounts as the ones from escort are to short the engine will be 15 to 20 mm lower than in the photo .
This image has been resized. Click here to view the full image. The original image is sized 1024x768.
This image has been resized. Click here to view the full image. The original image is sized 1024x768.
rear cradle has been bolted up and the rear diff. The rear link bars are to short as the fiesta is much wider so once i have the size for the link bars mark from mk motorsport wll make me longer ones .
This image has been resized. Click here to view the full image. The original image is sized 1024x768.
we need the prop made shorter so we can get it fitted so we can see what room we have for the exhaust . Domanic is thinking on mabie spliting the exhaust into twin 2.5inch pipes so it can run down past both side of the prop , we will wate and see , the rear box will be quite large as there is only one box in the system, it will sit across the boot floor its the same exhaust as ran on tommy grahams rally x car , even with it being a one box system its under 98db on high boost .

more up dates to follow soon i hope .

some parts sorted to

mk motor sport bladed anti roll bar kit, drop links blades ect
mk motor sport air injector bracket

tilton floor mounted peddal box ( brakes)

pro alloy fuel cell and swirl pot

thanks steven
__________________
work hard play harder........
Reply