first thing i have to do on this build is design a chassis so over the week end have had a measure up and have laid down the basic frame ideas.to do the front of the chassis i have to fit the wheels to the jag front hubs, to do this i need to change the pcd on the hubs from 5x120 to 5x112 so i have stripped the hubs of the front suspension so i can get them machined at work.once this is done and are back on and bolted to the wheels i will be able to finalise the front chassis locations and front suspension pickup points.
the chassis is going to be lazor cut at work so i need to draw up a proper set of technical drawings for my mate to work of and then he can draw it up on cad ready for cutting.so i have to get it right.try to get some pics on of my ideas as i go.