View Single Post
Old Feb 20, 2012 | 09:45 PM
  #3  
chrisa3's Avatar
chrisa3
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
Joined: Nov 2008
Posts: 1,163
Likes: 5
From: Newcastle
Default

i beleive its 0.3mm on both. fairly obvious on the crank sensor. the phase sensor, if you take the dizzy cap and rotor arm off, you will see the sensor has a flat head screw. loosen that off and then set the gap at 0.3mm. Pretty straight forward
Reply